Clipsal CLI755RLPSMA4 - Gen4 Surface Mounted Photoelectric 10 Year Rechargeable Battery Smoke Alarm

Clipsal CLI755RLPSMA4 - Gen4 Surface Mounted Photoelectric 10 Year Rechargeable Battery Smoke Alarm

Four (4) Smoke Alarms with Roof Cavity Installation
$1,103.80
Skip to product information
Clipsal CLI755RLPSMA4 - Gen4 Surface Mounted Photoelectric 10 Year Rechargeable Battery Smoke Alarm

Clipsal CLI755RLPSMA4 - Gen4 Surface Mounted Photoelectric 10 Year Rechargeable Battery Smoke Alarm

$1,103.80

Clipsal's Fire Tek range helps protect the most valuable assets; family, friends and the home. The high-quality, robust electronics of Clipsal smoke alarms are designed for reliability, to ensure early detection and warning from hazardous smoke and fire. It is simple to use and maintain, and one of few on the market carrying the 5 Ticks mark of quality assurance. 

Not sure how many Smoke Alarms you require? Refer to the Smoke Alarm Installation & Positioning requirements tables below. Smoke Alarms connected to a home's mains power require a licensed Electrician to install.

 

Features:

  • Photoelectric detection technology for early detection and warning from hazardous smoke and fire.
  • Includes surface-mount, low-profile and flush-mounted options.
  • Optional mounting bases for wireless interconnect or control of third party devices, with remote test/hush input option.

 

Product Range Fire Tek
Device Application Early detection of smouldering fires and open fires
Electronic Sensor Type Photo-electric sensor
Supply Mains 220-240 V AC 50 Hz
Secondary Power Source Rechargeable lithium battery (sealed in)
Battery Life 10 year(s)
Maximum Number of Device Interconnected 40 for Wired Alarm
Type of Installation Indoor
Device Mounting & Support Surface - Ceiling, Wall
Diameter (mm) 140
Height (mm) 47
Product Certifications RCM, SAI, Activfire
Standards ISO 8201, AS 3786:2014, AS/NZS 60950.1, AS/NZS 60065
Mercury free Yes
What's Included In This Package Clipsal CLI755RLPSMA4 Smoke Alarms & Installation of choice
Manufacture Warranty 18 month(s)

 

Installing Smoke Alarms for Private homes, townhouses and units

Smoke alarms must be installed:

  • on each storey
  • in each bedroom
  • in hallways that connect bedrooms and the rest of the dwelling
    • if there is no hallway, between the bedroom and other parts of the storey; and
    • if there are no bedrooms on a storey, at least one smoke alarm must be installed in the most likely path of travel to exit the dwelling.

 

 

Positioning Requirement
Flat ceiling Minimum 300mm from the wall
Cathedral ceiling 500mm to 1500mm from the peak
Vaulted ceiling 500mm to 1500mm from the peak & minimum 300mm from exposed joist
Suspended ceiling (closed) Minimum 300mm from the wall
Suspended ceiling (open) Must be mounted on the upper most ceiling & minimum 300mm from the wall
Beamed (exposed joist) ceiling Minimum 300mm from the wall & mounted on the underside of the joist
Lean-to ceiling 500mm to 1500mm from the peak
Tray ceiling 300mm to 500mm from the ceiling & minimum 300mm from the corner of 2 walls.  (Only if not practicable to mount a smoke alarm on a ceiling)
Wall mount 300mm to 500mm from the ceiling & minimum 300mm from the corner of 2 walls.  (Only if not practicable to mount a smoke alarm on a ceiling)


 

You may also like